|
|
| Code#: |
CL-Blue
/Red /Yellow /Green /BlueGreen |
| Colors: |
Blue,
Red,
Yellow, Green
and Blue/Green |
| Factory: |
China |
| Size: |
12
Inches |
| Features: |
Sound
Sensor, Power Inventer and Power Switch Included |
| Stock: |
Available |
|
Specifications
on Key Components
|
|
Bright of CCFL:
|
18000+3000
cd/m2. |
| Average life
of CCFL: |
15000hrs. |
| CCFL voltage:
|
200~1000v. |
| CCFL current
/ output of inverter: |
5mA.
|
| Power(W):
|
2.85+0.3. |
| Input voltage
of inverter: |
DC
12V. |
|
Guide
for Installation
|
| First
of all, Turn off your computer and press the round switch into off.
Then, please following the below step 1-8 to install cold cathode
light into your cases. If you have any questions about installation,
please do not hesitate send an e-mail to our technical
support section, thanks. |
|
|
|
|
|
| 1.
Connect wires to the pin of the round switch (Red to No.1 & Yellow
to No. 2) |
2. Make sure to
plug lamp(s) and wire hamess into inverter with three/two pitch connector. |
| |
|
|
|
|
3.
Plug the male 4 pin molex connector into
power supply. |
4. Mount CCFL with adhesive backed magic tape.
(1.3cm x 1.2cm, one set is spare)
|
| |
|
|
|
|
| 5.
Wrap inverter (Black magic tape, 10cm x 7cm), mount inverter in desired
location (near fan) with adhesive backed magic tape. (6cm x 2.5cm,
one is spare) |
6.
Decide the location on which you want the light switch is to be mounted,
cut or drill a hole for installing the light switch by the round washer. |
| |
|
|
|
|
|
7. Turn on the computer.
|
8.
Turn on the switch.
|
|
|
