|
|
| DFI
LanParty KT400A Mainboard |
- Processor
- AMD
AthlonXP 266/333/400MHz FSB
- AMD Athlon
266MHz FSB
- Chipset
- System Memory
- Supports
up to 3GB memory (unbuffered DIMM)
- Uses PC1600
(DDR200), PC2100 (DDR266), PC2700(DDR333) or PC3200(DDR400)
DDR SDRAM DIMM, 2.5V type
- Three 184-pin
DDR SDRAM DIMM sockets
- L2 cache
memory
- Duronprocessor:
built-in 64KB Level 2 pipelined burst cache
- AthlonXP/Athlonprocessor:
built-in 256KB Level 2 pipelined burst cache
- BIOS
- Award
BIOS, Windows 95/98/2000/ME/XP Plug and Play compatible
- Supports
SCSI sequential boot-up
- Flash
EPROM for easy BIOS upgrades
- Supports
DMI 2.0 function
- 4Mbit flash
memory
- Vcore and
CPU external bus clock selectable in the BIOS
- Energy Efficient Design
- Supports
ACPI specification and OS Directed Power Management
- Supports
ACPI STR (Suspend to RAM) function
- Wake-On-Events
include:
- Wake-On-Ring
(through internal or external modem)
- Wake-On-LAN
- RTC
timer to power-on the system
- System
power management supported
- Hardware
supports SMI green mode
- Microsoft
/ Intel APM 1.2 compliant
- Soft Power
supported - ACPI v1.0a specification
- AC power
failure recovery
- Damage Free Intelligence
- Monitors
CPU/system temperature
- Monitors
12V/5V/3.3V/CPU/VBAT(V)/5VSB(V)/DDR/AGP voltages
- Monitors
CPU/chassis fan speed
- Automatic
chassis fan on/off control - this prevents system overheat
and prolongs fan life
- Read back
capability that displays temperature, voltage and fan speed
- CPU Fan
Protection function during system boot-up
- CPU Temperature
Protection function during system boot-up
- Over Voltage
function
- CPU Overclocking
function by 1MHz stepping
- Audio Features
- AC'97 2.2S/PDIF
extension compliant codec
- Supports
Microsoft DirectSound/DirectSound 3D
- AC'97 supported
with full duplex, independent sample rate converter for
audio recording and playback
- 6-channel
audio outupt
- Onboard LAN Features
- Uses VIA
VT6103 Phy chip
- Integrated
IEEE 802.3, 10BASE-Tand 100BASE-TX compatible PHY
- VIA
8235 MI (Management Interface)
- Integrated
power management functions
- Full
duplex support at both 10 and 100 Mbps
- Supports
IEEE 802.3u auto-negotiation
- Supports
wire for management
- Uses Realtek
RTL8101L fast ethernet controller
- Integrated
IEEE 802.3, 10BASE-Tand 100BASE-TX compatible PHY
- 32-bit
PCI master interface
- Integrated
power management functions
- Supports
IEEE 802.3u auto-negotiation
- ATA RAID (Redundant Array of
Inexpensive Disk)
- RAID 0,
1, 0+1 and 1.5
- Two independent
IDE channels support 4 hard disk drives (UDMA modes 33/66/100/133
or EIDE)
- Supports
PIO modes 0/1/2/3/4, DMA modes 0/1/2 and UDMA modes 0/1/2/3/4/5/6
- PCI IDE Interface
- Supports
ATA/33, ATA/66, ATA/100 and ATA/133 hard drives
- UDMA Modes
3, 4, 5 and 6 Enhanced IDE (data transfer rate up to 133MB/sec.
- Bus mastering
reduces CPU utilization during disk transfer
- Supports
ATAPI CD-ROM, LS-120 and ZIP supported
- SATA IDE Interface
- Uses
Marvell 88i8030 chip
- Supports
one SATA (Serial ATA) interface which is compliant with
SATA 1.0 specification (1.5Gbps interface)
- IEEE 1394a Interface
- Uses VIA
VT6306 chip
- Supports
three 100/200/400 Mb/sec ports
- Processor Socket
- Socket A
- Equiped with
a switching voltage regulator that automatically detects 1.100V
to 1.850V
- Accelerated Graphics Port (A.G.P)
- Supports
AGP 8x up to 2132MB/sec. and AGP 4x up to 1066MB/sec. bandwidth
for 3D graphics applications
- Rear Panel I/O Ports
- 4 USB 2.0/1.1
ports
- 1 RJ45 LAN
port
- 2 DB-9 serial
ports
- 1 DB-25 parallel
port
- 1 mini-DIN-6
PS/2 mouse port
- 1 mini-DIN-6
PS/2 keyboard port
- 3 audio jacks:
line-out, line-in and mic-in
- I/O Connectors
- 1 connectors
for 2 additional external USB 2.0/1.1 ports
- 3 connectors
for 3 external IEEE 1394a ports
- 1 connector
for external line-out and mic-in jacks
- 1 connector
for an 1 external game/MIDI port
- 2 internal
audio connectors (CD-in and AUX-in)
- 1 4-channel
audio output connector
- 1 S/PDIF-in/out
connector
- 1 connector
for IrDA interface
- 2 RAID IDE
connectors
- 1 connector
for serial ATA interface
- 2 IDE connectors
- 1 floppy
connector
- 2 ATA power
supply connectors
- 1 Wake-On-LAN
connector
- 1 Wake-On-Ring
connector
- 3 fan connectors
for CPU, chassis and second chassis fans
- Expansion Slots
- 1 AGP slot
that supports 8x/4x AGP
- 5 PCI slots
- PCB
- 4 layers
ATX form factor
- 30.5cm
(12") x 24.5cm (9.64")
- References
- Stock:
|
|
|
|
|
|
Copyright Tradex Information Technology Inc. All Right Reserved.
Created by Bruce Young.
| |