DFI LanParty PRO875 Mainboard

Processor Intel Pentium 4 Processor with Hyper-Threading Technology 800MHz and 533MHz FSB Intel P4 Northwood and Prescott processor (478-pin) Supports 800MHz, 533MHz or 400MHz FSB Chipset Intel Canterwood chipset Intel 82875P Memory Controller Hub (MCH) Intel 82801EB I/O Controller Hub (ICH5) System Memory Supports dual channel (128-bit wide) memory interface Each channel supports 2 DIMM sockets Supports up to 4GB system memory Synchronous operation with processor system bus PC3200 (DDR400) with 800MHz FSB CPU (supports PAT Mode) PC2100/PC2700 (DDR266/DDR333) with 533MHz FSB CPU PC2100 (DDR266) with 400MHz FSB CPU Supports ECC/non-ECC DIMMs Supports unbuffered DIMMs BIOS Award BIOS, Windows 98SE/2000/ME/XP Plug and Play compatible Supports SCSI sequential boot-up Flash EPROM for easy BIOS upgrades Supports DMI 2.0 function 4Mbit flash memory Energy Efficient Design Supports ACPI specification and OS Directed Power Management Supports ACPI STR (Suspend to RAM) function Wake-On-Events include: Wake-On-Keyboard/Mouse Wake-On-USB Keyboard Wake-On-Ring (external modem) Wake-On-LAN RTC timer to power-on the system System power management supported CPU stopped clock control Microsoft / Intel APM 1.2 compliant Soft Power supported - ACPI v1.0a specification AC power failure recovery Damage Free Intelligence Monitors CPU/system temperature and overheat alarm Monitors Vcore/5VSB/VBAT/3.3V/5V/12V voltages and failure alarm Automatic chassis/second fan speed and failure alarm Automatic chassis/second fans on/off control Read back capability that displays temperature, voltage and fan speed Onboard Audio Features 20-bit stereo full-duplex codec with independent variable sampling rate High quality differential CD input True stereo line level outputs S/PDIF-in/out interface 6-channel audio outupt Onboard LAN Features Uses 82547EI Gigabit LAN CSA interface 32-bit PCI master interface Integrated power management functions Full duplex support at both 10, 100 and 1000 Mbps Supports IEEE 802.3u auto-negotiation Supports wire for management ATA RAID (Redundant Array of Inexpensive Disk) Uses HighPoint 372N RAID controller RAID 0, 1, 0+1 and 1.5 Two independent IDE channels support 4 hard disk drives (UDMA modes 33/66/100/133 or EIDE) Supports PIO modes 0/1/2/3/4, DMA modes 0/1/2 and UDMA modes 0/1/2/3/4/5/6 PCI IDE Interface Supports ATA/33, ATA/66 and ATA/100 hard drives PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.) Bus mastering reduces CPU utilization during disk transfer Supports ATAPI CD-ROM, LS-120 and ZIP SATA IDE Interface Supports two SATA (Serial ATA) interfaces which are compliant with SATA 1.0 specification (1.5Gbps interface) Processor Socket Supports 1.5V AGP 4x with up to 1066MB/sec. bandwidth for 3D graphics applications (3.3V AGP card is not supported) Supports AGP 3.0 and AGP 2.0 spec. AGP 8x data rate provides a theoretical maximum bandwidth of 2.13GB/sec. Rear Panel I/O Ports 4 USB 2.0/1.1 ports 1 RJ45 LAN port 2 DB-9 serial ports 1 DB-25 parallel port 1 mini-DIN-6 PS/2 mouse port 1 mini-DIN-6 PS/2 keyboard port 3 audio jacks: line-out, line-in and mic-in I/O Connectors 2 connectors for 4 additional external USB 2.0/1.1 ports 1 connector for an external line-out and mic-in jacks 1 connector for an external game/MIDO port 2 internal audio connectors (CD-in and AUX-in) 1 4-channel audio output connector 1 S/PDIF-in/out connector 1 connector for IrDA interface 2 RAID IDE connectors 2 Serial ATA connectors 2 IDE connectors 1 floppy connector 2 ATA power supply connectors 1 Wake-On-LAN connector 3 fan connectors for CPU fan, chassis fan and second fan Expansion Slots 1 AGP slot that supports 1.5V AGP 4x card 5 PCI slots Compatibility PCI 2.2 and AC '97 compliant Intel AGP version 3.0 PCB 4 layers ATX form factor 30.5cm (12.05") x 24.4cm (9.6") References www.lanparty.com.tw Stock: Not in-stock