|
KT400A  |
|
- Processor
- AMD Athlon XP 266/333/400MHz FSB
- AMD Athlon 266MHz FSB
- Chipset
- System Memory
- Supports up to 3GB memory (unbuffered DIMM)
- Uses PC1600 (DDR200), PC2100 (DDR266), PC2700(DDR333)
/ PC3200(DDR400) DDR SDRAM DIMM, 2.5V type
- Three 184-pin DDR SDRAM DIMM sockets
- L2 cache memory
- Duron processor: built-in 64KB Level 2 pipelined burst
cache
- Athlon XP/Athlon™processor: built-in 256KB Level
2 pipelined burst cache
- BIOS
- Award BIOS, Windows 95/98/2000/ME/XP Plug and Play compatible
- Supports SCSI sequential boot-up
- Flash EPROM for easy BIOS upgrades
- Supports DMI 2.0 function
- 4Mbit flash memory
- Vcore and CPU external bus clock selectable in the BIOS
- Energy Efficient Design
- Supports ACPI specification and OS Directed Power Management
- Supports ACPI STR (Suspend to RAM) function
- Wake-On-Events include:
- Wake-On-Ring (through internal or external modem)
- Wake-On-LAN
- RTC timer to power-on the system
- System power management supported
- Hardware supports SMI green mode
- Microsoft / Intel APM 1.2 compliant
- Soft Power supported - ACPI v1.0a specification
- AC power failure recovery
- Damage Free Intelligence
- Monitors CPU/system temperature
- Monitors 12V/5V/3.3V/CPU/VBAT(V)/5VSB(V)/DDR/AGP voltages
- Monitors CPU/chassis fan speed
- Automatic chassis fan on/off control - this prevents system
overheat and prolongs fan life
- Read back capability that displays temperature, voltage
and fan speed
- CPU Fan Protection function during system boot-up
- CPU Temperature Protection function during system boot-up
- Over Voltage function
- CPU Overclocking function by 1MHz stepping
- Audio Features
- AC'97 2.2S/PDIF extension compliant codec
- Supports Microsoft DirectSound/DirectSound 3D
- AC'97 supported with full duplex, independent sample rate
converter for audio recording and playback
- 6-channel audio outupt
- Onboard LAN Features
- Uses VIA VT6103 Phy chip
- Integrated IEEE 802.3, 10BASE-Tand 100BASE-TX compatible
PHY
- VIA 8235 MI (Management Interface)
- Integrated power management functions
- Full duplex support at both 10 and 100 Mbps
- Supports IEEE 802.3u auto-negotiation
- Supports wire for management
- Uses Realtek RTL8101L fast ethernet controller
- Integrated IEEE 802.3, 10BASE-Tand 100BASE-TX compatible
PHY
- 32-bit PCI master interface
- Integrated power management functions
- Supports IEEE 802.3u auto-negotiation
- ATA RAID (Redundant Array of Inexpensive Disk)
- RAID 0, 1, 0+1 and 1.5
- Two independent IDE channels support 4 hard disk drives
(UDMA modes 33/66/100/133 or EIDE)
- Supports PIO modes 0/1/2/3/4, DMA modes 0/1/2 and UDMA
modes 0/1/2/3/4/5/6
- PCI IDE Interface
- Supports ATA/33, ATA/66, ATA/100 and ATA/133 hard drives
- UDMA Modes 3, 4, 5 and 6 Enhanced IDE (data transfer rate
up to 133MB/sec.
- Bus mastering reduces CPU utilization during disk transfer
- Supports ATAPI CD-ROM, LS-120 and ZIP supported
- SATA IDE Interface
- Uses Marvell 88i8030 chip
- Supports one SATA (Serial ATA) interface which is compliant
with SATA 1.0 specification (1.5Gbps interface)
- IEEE 1394a Interface
- Uses VIA VT6306 chip
- Supports three 100/200/400 Mb/sec ports
- Processor Socket
- Socket A
- Equiped with a switching voltage regulator that automatically
detects 1.100V to 1.850V
- Accelerated Graphics Port (A.G.P)
- Supports AGP 8x up to 2132MB/sec. And AGP 4x up to 1066MB/sec.
Bandwidth for 3D graphics applications
- Rear Panel I/O Ports
- 4 USB 2.0/1.1 ports
- 1 RJ45 LAN port
- 2 DB-9 serial ports
- 1 DB-25 parallel port
- 1 mini-DIN-6 PS/2 mouse port
- 1 mini-DIN-6 PS/2 keyboard port
- 3 audio jacks: line-out, line-in and mic-in
- I/O Connectors
- 1 connectors for 2 additional external USB 2.0/1.1 ports
- 3 connectors for 3 external IEEE 1394a ports
- 1 connector for external line-out and mic-in jacks
- 1 connector for an 1 external game/MIDI port
- 2 internal audio connectors (CD-in and AUX-in)
- 1 4-channel audio output connector
- 1 S/PDIF-in/out connector
- 1 connector for IrDA interface
- 2 RAID IDE connectors
- 1 connector for serial ATA interface
- 2 IDE connectors
- 1 floppy connector
- 2 ATA power supply connectors
- 1 Wake-On-LAN connector
- 1 Wake-On-Ring connector
- 3 fan connectors for CPU, chassis and second chassis fans
- Expansion Slots
- 1 AGP slot that supports 8x/4x AGP
- 5 PCI slots
- PCB
- 4 layers ATX form factor
- 30.5cm (12") x 24.5cm (9.64")
- References
- Stock:
|
|
|
|
|
|
|
|
