|
DFI PRO875  |
|
- Processor
- Intel Pentium 4 Processor with Hyper-Threading Technology
- Intel P4 Northwood and Prescott processor (478-pin)
- Supports 800MHz, 533MHz or 400MHz FSB
- Chipset
- Intel Canterwood chipset
- Intel 82875P Memory Controller Hub (MCH)
- Intel 82801EB I/O Controller Hub (ICH5)
- System Memory
- Supports dual channel (128-bit wide) memory interface
- Each channel supports 2 DIMM sockets
- Supports up to 4GB system memory
- Synchronous operation with processor system bus
- PC3200 (DDR400) with 800MHz FSB CPU (supports PAT
Mode)
- PC2100/PC2700 (DDR266/DDR333) with 533MHz FSB CPU
- PC2100 (DDR266) with 400MHz FSB CPU
- Supports ECC/non-ECC DIMMs
- Supports unbuffered DIMMs
- BIOS
- Award BIOS, Windows 98SE/2000/ME/XP Plug and Play compatible
- Supports SCSI sequential boot-up
- Flash EPROM for easy BIOS upgrades
- Supports DMI 2.0 function
- 4Mbit flash memory
- Energy Efficient Design
- Supports ACPI specification and OS Directed Power Management
- Supports ACPI STR (Suspend to RAM) function
- Wake-On-Events include:
- Wake-On-Keyboard/Mouse
- Wake-On-USB Keyboard
- Wake-On-Ring (external modem)
- Wake-On-LAN
- RTC timer to power-on the system
- System power management supported
- CPU stopped clock control
- Microsoft / Intel APM 1.2 compliant
- Soft Power supported - ACPI v1.0a specification
- AC power failure recovery
- Damage Free Intelligence
- Monitors CPU/system temperature and overheat alarm
- Monitors Vcore/5VSB/VBAT/3.3V/5V/12V voltages and failure
alarm
- Automatic chassis/second fan speed and failure alarm
- Automatic chassis/second fans on/off control
- Read back capability that displays temperature, voltage
and fan speed
- Onboard Audio Features
- 20-bit stereo full-duplex codec with independent variable
sampling rate
- High quality differential CD input
- True stereo line level outputs
- S/PDIF-in/out interface
- 6-channel audio outupt
- Onboard LAN Features
- Uses 82547EI Gigabit LAN CSA interface
- 32-bit PCI master interface
- Integrated power management functions
- Full duplex support at both 10, 100 and 1000 Mbps
- Supports IEEE 802.3u auto-negotiation
- Supports wire for management
- ATA RAID (Redundant Array of Inexpensive Disk)
- Uses HighPoint 372N RAID controller
- RAID 0, 1, 0+1 and 1.5
- Two independent IDE channels support 4 hard disk drives
(UDMA modes 33/66/100/133 or EIDE)
- Supports PIO modes 0/1/2/3/4, DMA modes 0/1/2 and UDMA
modes 0/1/2/3/4/5/6
- PCI IDE Interface
- Supports ATA/33, ATA/66 and ATA/100 hard drives
- PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.)
- Bus mastering reduces CPU utilization during disk transfer
- Supports ATAPI CD-ROM, LS-120 and ZIP
- SATA IDE Interface
- Supports two SATA (Serial ATA) interfaces which are compliant
with SATA 1.0 specification (1.5Gbps interface)
- Processor Socket
- Supports 1.5V AGP 4x with up to 1066MB/sec. Bandwidth for
3D graphics applications (3.3V AGP card is not supported)
- Supports AGP 3.0 and AGP 2.0 spec.
- AGP 8x data rate provides a theoretical maximum bandwidth
of 2.13GB/sec.
- Rear Panel I/O Ports
- 4 USB 2.0/1.1 ports
- 1 RJ45 LAN port
- 2 DB-9 serial ports
- 1 DB-25 parallel port
- 1 mini-DIN-6 PS/2 mouse port
- 1 mini-DIN-6 PS/2 keyboard port
- 3 audio jacks: line-out, line-in and mic-in
- I/O Connectors
- 2 connectors for 4 additional external USB 2.0/1.1 ports
- 1 connector for an external line-out and mic-in jacks
- 1 connector for an external game/MIDO port
- 2 internal audio connectors (CD-in and AUX-in)
- 1 4-channel audio output connector
- 1 S/PDIF-in/out connector
- 1 connector for IrDA interface
- 2 RAID IDE connectors
- 2 Serial ATA connectors
- 2 IDE connectors
- 1 floppy connector
- 2 ATA power supply connectors
- 1 Wake-On-LAN connector
- 3 fan connectors for CPU fan, chassis fan and second fan
- Expansion Slots
- 1 AGP slot that supports 1.5V AGP 4x card
- 5 PCI slots
- Compatibility
- PCI 2.2 and AC '97 compliant
- Intel AGP version 3.0
- PCB
- 4 layers ATX form factor
- 30.5cm (12.05") x 24.4cm (9.6")
- References
- Stock:
|
|
|
|
|
|
|
|
